Course Introduction
International Rope Access Trade Association(known for as IRATA)
  • Has moreover 700 member companies
  • Trained more than 130,000 technicians
  • Designated licenses for oil platforms, green energy related wind power generation, etc.

IRATA International Rope Access Training

Upcoming courses:
 Slide to see the whole chart
  • 5/24(Fri)~5/27(Mon)+5/28(Tue)Assessment
  • 6/21(Fri)~6/24(Mon)+6/25(Tue)Assessment(Booked Solid)
  • 8/10(Sat)~8/13(Tue)+8/14(Wed) Assessment
  • 10/25(Fri)~10/28(Mon)+10/29(Tue) Assessment
  • 11/22(Fri)~11/25(Mon)+11/26(Tue) Assessment

Click the reservation link below if you're not available
for the above mentioned date.

Suitable for Rope Access

  • Those who work abroad or join foreign companies in the wind energy industry to work as an aerial rope worker.

  • External Wall Cleaning, Signboard Installation, Canvas Installation, Waterproofing & Leakage Catch, Chimney Maintenance, Rust Removal & Painting Maintenance for Steel Structures, Power Tower Maintenance, Wind Turbine Maintenance, Non-Destructive Testing (NDT), Offshore Drilling Platforms, etc.

  • Rescuer (Firefighting, etc.)

Course fee and related information

  • Eligibility: Aged 18 or above, able-bodied persons


  • Course Duration: 5 days (4 days of training and 1 day of assessment)

  • Time: 8:30 a.m. to 5:30 p.m. (60-minute break at noon) during the course.

  • Location: No. 109, Lane 150, Gongyi Road, Longtan District, Taoyuan City (Indoor Training Center)

  • Course Fee: NT$36,000 for "L1, L2, L3 First-time Training and Upgrading"; NT$28,800 for "Same Level Repeat Training".

  • Remarks: Our training center is very considerate, we can book hotels and lodgings to pick you up and drop you off classes. Lunch will be provided by the training center, with drinking water, drinks and snacks.         

  • Course Fee
    1. Third party liability insurance for public accidents (insurance coverage does not include accidents occured from leaving the training center, and occured during lunch breaks are also not covered.
    2. Provide a full set of PPE (Personal Protective Equipment) for use during training.
    3. IRATA Level 3 Instructor, one level of instructor teaching fee.
    4. IRATA Foreign Examiner, one level of course evaluation fee, quarantine and travel expenses.
    5. Certificate registration and related administrative fees.

  • Course fees don't include
    1. The cost of re-assessment if the assessment did not pass.
    2. Food and beverages not provided by the training center.
    3. Damage of personal property (cell phones, laptops, damaged clothing, etc.).

Industrial Rope Technology Training Center

XRA(IRATA MEMBER 3053/OT)ROPE ACCESS TECHNICAL TRAINING CENTER is an IRATA INTERNATIONAL certified, safely built, and we have experienced Level 3 personnel to provide technical guidance. More importantly, we listen to your needs to improve your work safety. In addition, we also do a good ventilation of the venue so that the people who participate in the training have a more comfortable learning environment to enhance the learning effect.


International Industrial Rope Technology Association(IRATA)
IRATA International is the world's recognized authority in the field of industrial rope technology. Founded in 1988 in the UK as the Industrial Ropes Access Trade Association, the name IRATA International has grown with the increase in membership worldwide. The aim of the association is to promote and develop the safety systems it has pioneered since its inception and to support its member companies and trained technicians so that they can work in a safe and efficient manner.
Based in the UK, the IRATA Association's main focus is on the development of rigorous technical guidelines and training standards. The main guidance documents are the IRATA ICOP (International Code of Practice) and the IRATA TACS (Training and Accreditation Certification Scheme), which are also contained in the British Standard BS7985 system and the ISO22846 Technical Standard for Technical Systems for Ropes, which was published in 2012.
The ROPE ACCESS promoted by IRATA is a unique two-rope operation, i.e., each operator uses two ropes on his/her body during operation, one for the working line and one for the safety line, so that when the working rope breaks or snapped in case of accidents, the operator still has a safety line to protect his/her work safety.
Statistics have shown,  none of the rope operators in the world using the IRATA technique during 1999 to 2012 had died. Proven enough that the IRATA promotion of rope technology is very safe. Currently,the Labor Inspection Department of Taipei also approved the use of rope technology in line with the IRATA system to perform aerial work!


Rope access is a special and specialized way of working at height, using rope access allows workers to reach many difficult to reach terrain, including cranes, aerial work trucks, cages and scaffolds and other ways that aren't able to perform the work. Rope access is often used in building maintenance, offshore oil drilling platforms, oil tanks, large wind turbines, non-destructive testing and other work environments.



Rope Access is a cost-effective alternative to traditional construction methods, especially in the case of super high place, inaccessible to cranes and in special environments.
The advantages of rope access are as follows:

  • Set up and dismantle fast

  • Accurate access to the working position

  • Minimized disruption to the original business and reduced equipment downtime

  • No restriction to small working space, work can be done at any time

  • Reduces the use of heavy equipment (cranes, hoists, scaffolds, etc.), effectively reducing costs.

IRATA Level 1 Training Axis

IRATA Level 1 course is an introduction to rope access, the purpose is to allow partners with little or no experience to obtain professional and correct rope access operations and concepts. In the training process we will continue to carry out practical training, so that trainees can familiarize themselves with the first level rope access. After the training and obtaining a certificate, they can clearly understand Level 2 or Level 3 technician's instructions in the workplace.

Level 1-Training Course Contents (For details, please go to the file download area below)


After completing the four-day training, IRATA will arrange for an independent foreign examiner to assess the skills of the trainees. Passing the examiner's assessment is the only way to obtain a Level 1 certificate, which shows that IRATA's system is rigorous, and because of this, it is only worthwhile to obtain this certificate after you have passed the assessment and completed the training.

Photo Gallery